400mW 473nm DPSS Laser System, 5% Power Stability
Description
473nm, 400mW DPSS laser system including diode driver with better than 5% power stability. The driver includes an LED display providing input current measurements to the diode. The driver also includes a manual output power control knob allowing manual output power adjustment from 0mW to the maximum rated output simply by adjusting the front panel control. Safety features include a key switch, remote interlock, ON/OFF switch, and beam on delay. The laser ships with laser head, power supply/driver and operating manual.
System Specifications
Wavelength (nm) | 473±1 |
WARNINGS and NOTES
Please be sure the laser system meets your needs. This laser is semi-custom and built on your order. We do not accept returns for working laser systems meeting the listed specifications. If you are not sure the laser will meet your application requirements please send us an email or call us. We will assist you as necessary to make sure you have the right system for your application. Images and specifications are subject to change. We make every effort to insure the images and information displayed are accurate but technical specifications do change over time due to design improvement. Images of systems may not necessarily represent an exact reproduction of the actual laser head or driver. Images used are stock photography. |
Laser Type | DPSS | |
Output Power (mW) | 400 | |
Beam Shape | Round | |
Transverse Mode | Near TEM00 | |
Operating Mode | CW | |
Power Stability (RMS Over 4-Hours) | <5% | |
Warm-Up Time (Minutes) | <10 | |
M2 Factor | 2.0 | |
Beam Divergence (mrad, Full-Angle) | <1.5 | |
Beam Diameter (mm, At Aperture) | ~3.0 | |
Beam Height (mm, From Base Plate) | 45 | |
Polarization Ratio | >100:1 | |
Pointing Stability (mrad, After Warm-Up) | <0.05 | |
Operating Temperature (°C) | 10-35 | |
Power Supply (90-264VAC) | PSU-H LED | |
Modulation | TTL/Analog (10kHz/10kHz) | |
Power Supply Dimensions (mm) | 268(L) x 145(W) x 106(H) | |
Power Supply Weight (kg) | 2.6 | |
Laser Head Dimensions (mm) | 209(L) x 88(W) x 74(H) | |
Laser Head Weight (kg) | 1.6 | |
Expected Lifetime (Hours) | 10000 | |
Warranty Period | 1-Year Limited Warranty | |
FDA Compliance | FDA CDRH Title 21 CFR 1040.10/11 Class 3b |